Oil Spot combination
£20
Brush on glaze, 1240–1280°C / Orton Cone 5–8
The ceramic brush-on glaze surface, Oil Spot, is achieved through the layering of two distinct glazes. Beginning with the application of Tea Dust glaze, we recommend two to three coats for optimal coverage. Once dry, an additional two coats of Milky Matt glaze are applied to produce the desired spotty, variegated effect. This technique creates a visually intriguing surface with contrasting textures and subtle variations, adding depth and character to ceramic pieces. The result will vary greatly, depending on application and firing.
How to Apply
A combination of Tea Dust and Milky Matt glazes: we recommend 2 coast of Milky Matt over 2/3 coats of Tea Dust. Letting the piece dry between coast is advised and experimenting with thickness of application to achieve diverse results.
WARNING! Do not ingest. Keep away from eyes. If product gets into eyes rinse thoroughly with water. Avoid dust and dry glaze build up from evaporation of solution. Wash with a wet cloth only and do not sweep or dust off. Ensure adequate ventilation during firing.
This ceramic glaze is ready for brush-on application. Stir thoroughly before use to ensure an even mix with no sediment. Apply 2-3 coats using a brush or sponge for a consistent finish. For varied effects, experiment with different application techniques and coat thicknesses, but be sure to protect your kiln shelves. Please note that results may vary depending on application thickness, firing temperature, and cycle. Testing is recommended.
Shipping
We ship in 2-7 working days with UPS, who has offered the most prompt and reliable service to date. We readily ship international orders but please note GLOST does not cover the TAX for international delivery.
Returns
We do accept returns for unopened items which must be in original condition. Used or tampered products will not be refunded. Return shipping is at the customers cost and risk.
